CUSTOMER PRODUCT REFERENCE
Complete product family
These model-level references carry the Mobility Lab selection path onto the detailed product page, including task fit, capabilities, limitations, specifications, availability and Radventurers pricing pathways.
DNSYS
DNSYS X1 Series
Hips / legs · Powered
Best fit
- Walking & hiking
- Longer-distance mobility / endurance
- Stairs and slopes for independently mobile users
- Customers comparing lighter vs. extended-range configurations
What it does
- Motorized hip assistance synchronized to gait
- Adaptive assist plus controlled resistance / training modes
- Swappable X1 Smart Battery system
- Model choices for weight, materials and range
What it does not do
- Does not provide balance support or walk for the user
- Not a medical / rehabilitation device
- Requires independent walking, leg lift and balance
- X1 batteries / chargers are not interchangeable with Z1 hardware
Key specifications
- X1 Lite / Carbon / Carbon Pro / X1+Z1
- Up to ~900 W class
- 15 km base; Carbon Pro up to 30 km with two batteries
- Model-dependent materials and range
First-use fitting & operation
DNSYS X1 Series
Use this quick-start guide together with the current manufacturer manual and training materials.
Fit & adjust
- Confirm all X1 components are present and connect the X1 Smart Battery as shown in the manual.
- Wear and tighten the waist/hip system and leg straps symmetrically using the first-time wearing guide.
- Check that the device tracks the hips without pressure, looseness or interference with normal leg motion.
Operate & learn
- Install/connect the DNSYS app where required, then power on and complete first-use setup.
- Learn activation and mode switching on level ground before stairs, slopes or faster movement.
- Use assist/resistance modes only after understanding the response of the device.
Care, charging & storage
- Use only X1-compatible battery/charger hardware; X1 and Z1 batteries are not interchangeable.
- Inspect straps, joints, battery contacts and housing before use.
- Charge, clean and store according to the current DNSYS manual.
First-use safety
- Independent walking, leg lift and balance are required.
- Stop for instability, unexpected output, skin pressure or device faults.
- Do not begin first use on stairs, steep terrain or crowded routes.
Pricing & access
DNSYS
DNSYS Z1 Series
Knees · Powered
Best fit
- Stairs & steep slopes
- Hiking / demanding terrain
- Sit-to-stand and squat assistance
- Knee-focused or combined hip + knee support
What it does
- Adds powered assistance at the knee joint
- Supports ascent, descent, standing and squat-type movement
- Uses multi-sensor AI movement recognition
- Can pair with X1 in supported combined configurations
What it does not do
- Does not provide independent balance
- Not a medical treatment or rehabilitation device
- Requires independent walking and normal leg-lifting ability
- Uses Z1-specific battery / charging hardware
Key specifications
- Dual Joint / Dual Joint Pro / Z1 + X1
- Up to 50% motion assist
- Up to 15 km base; selected Pro configurations up to 30 km
- Approx. 680 g per leg on Dual Joint
First-use fitting & operation
DNSYS Z1 Series
Use this quick-start guide together with the current manufacturer manual and training materials.
Fit & adjust
- Fit the belt and left/right knee units as shown in the Z1 manual, aligning the joint with the knee.
- Secure straps so the units remain aligned without restricting circulation or normal knee flexion.
- Complete the official Z1 calibration procedure after fitting; repeat calibration when fit or user changes.
Operate & learn
- Begin on level ground and learn standing, walking and controlled knee assistance before stairs or slopes.
- Use the model-specific controls/modes only after successful calibration.
- If using a supported X1+Z1 configuration, follow the combined-system instructions rather than mixing hardware informally.
Care, charging & storage
- Use Z1-specific PowerPlus battery/charging hardware.
- Inspect straps, joint alignment, fasteners, battery and sensors before use.
- Keep clean/dry and store/charge within manufacturer conditions.
First-use safety
- Independent balance and normal leg-lifting ability are required.
- Bad calibration can change assistance behavior; stop and recalibrate rather than continuing.
- Stop for knee pressure, misalignment, instability, unexpected output or fault indication.
Pricing & access
One dashboard. Select exactly what you want to reference.
10 device programs · 150 levels · 450 guided sessions
Potential applications
- Walking and hiking
- Stairs and slopes
- Outdoor recreation
- Movement and endurance education
- Consumer product demonstrations
What it is not
- A medical device for the X1/Z1 consumer products
- A balance aid
- Recommended for users with limited balance without professional guidance
- A substitute for medical assessment or prescribed mobility equipment
SAFETY ORIENTATION
Use begins with fit, training, and limitations.
This page is an educational overview—not the manufacturer’s complete manual. Read and follow the current manual, warnings, eligibility criteria, maintenance guidance, and regional requirements before use.
- Users should understand that assistance does not create balance.
- Check all straps, supports, batteries, and calibration before movement.
- Train on level ground before stairs, slopes, or uneven terrain.
- Follow model-specific weight, fit, weather, and activity limits.
- Stop for knee pressure, skin irritation, instability, unexpected motor output, or device fault.
MANUFACTURER MANUALS & HOW-TO GUIDES
Official manufacturer resource hub
Open the current manufacturer instructions before fitting, charging, operating or maintaining the product. These links open the manufacturer’s own website in a new tab.
Purchase, try, or equip a group
Choose the path that best fits how you want to experience DNSYS. Radventurers will confirm current availability, configuration and fulfillment details before any order or rental is finalized.
CHOOSE YOUR PATH
Availability, configuration, delivery, rental eligibility, deposits, taxes and final pricing are confirmed before fulfillment.
EVIDENCE-BASED PRODUCT GUIDE
DNSYS X1 / Z1: what to know before you choose
Radventurers separates manufacturer-published specifications, independent reviews and research, and public field research so you can see where each statement comes from.
Manufacturer-published information
- DNSYS lists X1 configurations from 500 W to 900 W peak power, mechanical weight around 1.6–1.8 kg, and stated ranges of roughly 15–40 km depending on configuration/battery count.
- The manufacturer describes rapid battery swapping, gait-adaptive control and IP54 protection for X1.
- DNSYS explicitly states X1 is not a medical or rehabilitation device and requires independent walking, normal leg lifting and balance.
Published reviews & research
- WIRED's 2026 comparison found DNSYS assistance tangible and sometimes more forceful than Hypershell, but described its motion as jerkier/noisier and the design as less polished.
- The same comparison emphasized that individual benefit varies considerably, particularly between healthy active users and older users with mobility challenges.
Limitations & questions to evaluate
- Not a medical or rehabilitation device
- Requires independent walking and balance
- Water resistance is not immersion protection
- Power delivery may require acclimation
- Battery, terrain and mode affect range
Sources & further reading
- Manufacturer: DNSYS X1 official overview
- Manufacturer: DNSYS X1 product page
- Review: WIRED – We Raced Exoskeletons
Database last verified: 1.9-public-no-. Specifications and availability can change; Radventurers reconfirms commercial details before quoting or deployment.
NEXT STEP